Please send an email to nige at iointegration dot com to add or remove a listing.
======
Bladerider X8 in Chicago, USA
======
Mach 2 For Sale
Complete boat ready to sail!
Mach 2 #3597 with Mach 2 mast and 10B sail. Includes covers, wood box, ride height adjuster, etc. Currently located Seattle, but will ship to California or Florida in time for the upcoming regattas. $14,500.
Jonathan McKee
jonathanmckee@msn.com, or 206 356 7952
====
2009 Mach 2
Always garaged, fresh water sailed.
Looks and sails like new.
Brand new KA- MSL 10c and practice MSL 13.1
Ride height dial, Harken blocks, upgraded spectra lines, breather tubes.
$15K
selling as an act of pure altruism on behalf of the building US fleet (and so I can buy a second M2)
Paul Kilkenny
(408- 667- 4374)
====
A standard 2009 Mach 2 Moth. Has sailed the worlds in the Gorge and Aus, also did the Europeans in St. Mortiz.
Located in Newport, RI.
Boat comes with new wand mech 2.1 as well as a “Bora” Ride Height Adjuster with speed ratio adjustment.
A Raptor and CST 356 are also available.
Price is 15k
email AnthonyKotoun at gmail dot com or call 401 338 2010
=====
Bladerider 3431 For Sale – $8000
Bladerider X8 Hull #3431
The Pearl
Competitive, race ready, well tuned Bladerider available for sale. Comes complete with the following:
- Bladerider foils,
- Bladerider mast and boom
- Bladerider practice sail
- KA MSL 10b Sail.
- Boat dolly
- Boat cover and padded foil covers
- Ride height adjuster
- Spare trampolines, rudder stock various parts etc
- Lightweight glass travel box
New Trampolines – used for 5 days.
Contact: Nigel Oswald – 415 370 5755 or nige at iointegration dot com
====
Bladerider VRX for sale – 13,000
comes complete with shipping crate and dolly.
extra mast (Mach 2) and North sail
rigging is new and in good shape.
The boat was new for the 2009 Gorge worlds and has only sailed 2 regattas after that.
Boat is in great shape.
email saildoogie@gmail.com
or call 707-971-0328
========
BLADERIDER SPARES!!!
As some of you know I bought the remaining Bladerider spare parts stock from George at West Coast Sailing. Not the smartest business move but I think George is a remarkable ambassador for sailing and the Moth class over the last few years and I wanted to do him a favor and allow him to draw a line under the unfortunate Bladerider saga.
So I have just inventoried the parts and this is what I have, prices are relatively negotiable (especially if you take a number of items), I am just looking to get as much money back as possible while keeping a few spares handy.
I believe this is the last stock of BR parts around after speaking with the ex UK reseller so if you have a BR and want some spares, please let me know asap, I don’t want to hold onto this for long. There may also be some good parts for home builders etc (lots of carbon tubes inc 90 % of a complete RX wing bar set).
All Brand new, never seen the light of day (UV etc), I have multiple quantities of most of these:
BR All Models:
Carbon Boom (for std mast)———–(Retail $600)——Asking:$250
Upper Wing Bar tube (Pair)———-(Retail $80)——–Asking:$40
Foot Straps————————-(Retail $20)——–Asking:$10
Main Foil Push rods—————–(Retail $15)——–Asking:$9
Wing Cover Lacing rods————–(Retail $7)———Asking:$5
Main foil bell crank—————-(Retail $12)——–Asking:$5
Gudgeon Sliding/Worm Nut————(Retail $9)———Asking:$4
Wand Swivel————————-(Retail $5)———Asking:$3
Wand Tensioners———————(Retail $1)———Asking:$1
Foil retaining pins—————–(Retail $3)———Asking:$1
(I have about 200 of these pins!)
BR X8/VRX
VRX/X8 Rear Wing Bar———————–(Retail $1,150)—-Asking:$450
VRX/X8 Front Right Wing Bar—————-(Retail $590)——Asking:$200
VRX/X8 Outer Wing Bar———————-(Retail $350)——Asking:$150
VRX/X8 Mast Stump————————–(Retail $290)——Asking:$130
Fiberglass Ubolt washer——————–(Retail $9)———Asking:$5
BR RX
RX Front lower Wing Bar——————-(Retail $255)——-Asking $150
RX Outer Wing Bar————————-(Retail $255)——-Asking:$150
RX Rear Wing Bar————————–(Retail $315)——-Asking:$150
RX Rear Wing Bar Blocks (Pair)————(Retail $60)——–Asking:$30
RX Outer Wing 90deg sockets (Pair)——–(Retail $20)——–Asking:$10
RX crbn tiller(38.75,OD:1.125,ID:0.94)——(Retail $145)—-Asking:$40
Foil insert for daggerboard—————(Retail $20)——–Asking:$5
RX Gantry bushings ———————–(Retail $2)———Asking:$1
Let me know if you want anything!
415 370 5755 or nige at iointegration dot com
Thanks
Nige
===========
===========
Bladerider x8 hull #3221
Great boat to learn how to sail and begin racing! It is tuned and ready to sail. The boat is black and red and completely reinforced.
Comes Complete with:
-Bladerider foils
-Bladerider sail (Practice)
-KA #10 Sail (well used but still race condition)
-Bladerider Mast, Boom, and rigging
-Ride height controller
-different gear ratios
-extra centerboard horizontal
-Spare wands
-Full Covers
-Dolly
Price is negotiable
Located in Coronado Yacht Club, California
Contact Hans Henken hans@teamortho.com
============
============
Mach 2 parts!
Sailing bits carbon sail cams/camber inducers for 40mm OD mast. Very light weight and will not fall off when using light cunningham. $120 for the set of 4.
Sailing bits velocitek GPS mount. Very light weight, fits to compression struts. $150
Contact:
Paul Hayden
paul.hayden@bladedynamics.com
504 390 3724
=====